
Getting started
1. Install CADCraft
Section titled “1. Install CADCraft”The quickest way is ArtCraft Launcher: install it, then press Install on CADCraft’s card. To download CADCraft on its own, see Install and update.
2. Open CADCraft
Section titled “2. Open CADCraft”CADCraft opens with a new, empty drawing. Around it you’ll find:
- Tool Sets on the left, with buttons for drawing, hatching, blocks, editing, text and dimensions.
- Layers and Properties on the right.
- The command line at the bottom of the drawing area, where you type commands.
- The status bar along the bottom, with the Model and layout tabs and the drafting toggles.
To look around a finished drawing first, choose Help › Open Sample Drawing. The Start tab, next to your drawing’s tab, also lets you open a drawing, start a new one or a new metric one, and reopen recent files.
3. Draw at the command line
Section titled “3. Draw at the command line”Click in the command line, or start typing. Try these, pressing Enter after each:
line 0,0 @10,0 @0,5 ccircle 5,2 1zoom eThe first draws a closed triangle: it starts at 0,0, goes 10 units right, then 5 up, and c closes it. The second draws a circle with its center at 5,2 and a radius of 1. zoom e zooms to fit the whole drawing.
A few things that work as CAD users expect:
- Most commands have a short alias:
lfor LINE,cfor CIRCLE,plfor PLINE,ofor OFFSET,trfor TRIM,zfor ZOOM. @makes a point relative to the last one:@10,0is 10 units along X, and@5<45is 5 units at 45 degrees.- Prompts show their options in square brackets. Type the capital letters of one, or click it.
- Esc cancels a command. Enter or Space repeats the last one, and so does Repeat at the top of the right-click menu.
You can also click a tool in Tool Sets and then click points in the drawing.
4. Offset a shape
Section titled “4. Offset a shape”Type offset 0.25, then click the circle and click outside it. CADCraft draws a second circle 0.25 units larger.
5. Save
Section titled “5. Save”Press Ctrl+S (⌘S on a Mac). A new drawing is saved as DXF unless you choose otherwise. To save as DWG, choose File › Save As… and pick Drawing (DWG), or change Save new drawings as in Tools › Options › Open and Save.
CADCraft also autosaves unsaved drawings every 10 minutes, so it can offer them back after a crash. See Troubleshooting.
6. Share as a PDF
Section titled “6. Share as a PDF”Choose File › Export to PDF… and pick where to save. The PDF is drawn with real vector lines, so it stays sharp at any zoom.
Next steps
Section titled “Next steps”- Workflows: object snaps, layers, dimensions, hatches, blocks and layouts.
- DWG and DXF files: what is kept when you open and save drawings from other programs.
- Troubleshooting: if the window doesn’t open or something looks wrong.